Nahlásiť • Board Game Arena

Všetky hlásenia

Hlásenia hry Liverpool (Cozy Oaks) Rummy

#32974: "Using joker from table during going down VERY confusing"

fixed: Problém bol opravený

O čom je toto hlásenie?

Liverpool (Cozy Oaks) Rummy #143249781

Čo sa stalo? Prosím vyber z nasledujúcich

Rozhranie ma zablokovalo pred ťahom dovoleným v pravidlách

Čo sa stalo? Prosím vyber z nasledujúcich

Rozhranie ma zablokovalo pred ťahom dovoleným v pravidlách

Prosím skontroluj, či už existuje hlásenie na rovnakú tému

Ak je to tak, prosím HLASUJTE za toto hlásenie. Hlásenia s najviac hlasmi majú PRIORITU!

#	Status	Votes	Game	Type	Title	Last update

Podrobný popis

História hlásenia

29 Jan 2021 07:26 • RPI_jEsTeR • Problém zatiaľ nebol zopakovaný programátormi:

See 32969. The inability to tell if a joker was selected may have been the crux of the issue. But even with that, the current interface is finicky. Once you understand it, it is perhaps more efficient, but NOBODY in our group (6 players) got it the first time without many unsuccessful tries first.

Not sure if a wizard-like interface could be done where you can click "Go down with table joker" and it walks you through "place complete meld(s)" "place incomplete melds" "put card to replace joker in 'Card for Joker'" "select joker to replace"

29 Jan 2021 07:39 • GoDodyGo • Ďalšie informácie sú požadované programátormi na zopakovanie tohto problému:

I agree this was tricky for me to try to figure out a good method. Even after I explain it to my family they struggle. It's better than it was (sorry, I know that's not helpful, lol).

How about if I change it to work this way:

* If there is only 1 joker on the table, the game should try to use the CARD FOR JOKER card to replace it. So, there's no need for the player to select a joker.

* If there is >1 joker on the table then a pop-up would appear and the player can select which joker to try to replace.

I think I may be able to figure that out.

29 Jan 2021 22:08 • RPI_jEsTeR • Ďalšie informácie sú požadované programátormi na zopakovanie tohto problému:

I very much appreciate how hard it is to make these interfaces flow well! Like I said in another comment, I was very impressed with how well things work overall already. This was just the sticky bit for my whole crew, so I figured it was worth a comment.

I really like the idea of auto-picking the joker if there is only one on the table. That makes total sense.

What if you have text in the "Card for Joker" box that helps cue? Say text above the card in the box that only appears if there is actually a card there. It could say "Joker selected" if you've picked a joker to replace (or if there is only one), and it could say "please select a joker to replace" if you haven't picked a joker.

I think it is intuitive and people will want to place the card that will replace the joker into that box. So if by having a card in that box the box then tells you how to finish being ready to go down?

(Oh, and per a different report, I also think joker selection not showing a change on-screen, at least on Chrome, is part of the confusion. Having a visual cue that you've got a joker on table selected or not would help a lot)

Of course a gotcha here is that you can be preparing your meld on other peoples' turns, and the selected joker may get replaced. Just a detail to react to as you process the notification for a selected joker getting taken into a player's hand I guess.

And it is a tangent to this ticket, but if you're putting guidance text in the boxes, it would let you add "incomplete meld", "too many cards", and "contract not met" in the meld boxes to help guide players. I think we all at some point had a 4 card set in the meld box and when you click "Go Down" you get a somewhat cryptic error message. If putting a fourth card for a set (or a fifth for a run) in the box had it immediately say "too many cards", I think players might figure it out quicker. And similarly if you mistakenly put in 2 runs when it should have been a set and a run, the last meld box for the contract can tell you "contract not met" (which I'm thinking only appears once each meld box has a complete run or set in it). An idea anyhow (and let me know if you'd like me to enter it as a separate Report for your tracking if you think you'd like to do it, but maybe not right away and you want to track it).

10 Feb 2021 02:51 • janezy • Ďalšie informácie sú požadované programátormi na zopakovanie tohto problému:

Taking the green outlining off from around the jokers on the table was super helpful. It was much easier to see if you'd selected a joker to replace and made the process easier.

18 Jul 2021 01:07 • GoDodyGo • Problém bol opravený:

More clear now.

Pridať niečo k tomuto hláseniu

Prosím sem pridaj čokoľvek, čo sa zdá byť podstatné za účelom zreprodukovania tejto závady alebo pochopenia Tvojho podnetu:

Iné ID stola / ID ťahu
Vyriešil sa problém pomocou F5?
Objavil sa problém viackrát? Zakaždým? Náhodne?
Ak máš screenshot (dobrý zvyk), môžeš použiť Imgur.com na jeho nahranie a skopírovať sem odkaz na neho.

Zrušiť Aktualizovať hlásenie

#32974: "Using joker from table during going down VERY confusing"

O čom je toto hlásenie?

Čo sa stalo? Prosím vyber z nasledujúcich

Čo sa stalo? Prosím vyber z nasledujúcich

Prosím skontroluj, či už existuje hlásenie na rovnakú tému

Podrobný popis

História hlásenia

Pridať niečo k tomuto hláseniu

Zmeniť status hlásenia na:

Pomoc

Prispievať

Navigovať

Sleduj nás