• Prosím skopíruj a vlož chybové hlásenie, ktoré si videl na obrazovke, ak sa nejaké vyskytlo.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Prosím vysvetli, čo si chcel/a spraviť, čo si spravil/a a čo sa stalo

• Aký prehliadač používaš?

• Skopíruj/vlož text zobrazený v angličtine namiesto tvojho jazyka. Ak máš screenshot (dobrý zvyk), môžeš použiť Imgur.com na jeho nahranie a skopírovať sem odkaz na neho.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Je tento text dostupný v prekladovom systéme? Ak áno, bol preložený po dlhšie ako 24 hodín?

• Aký prehliadač používaš?

• Prosím presne a stručne vysvetli svoj podnet, aby bolo čo najjednoduchšie pochopiť, ako to myslíš.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Aký prehliadač používaš?

• Čo sa objavilo na obrazovke, keď si bol zablokovaný (Prázdna obrazovka? Časť herného rozhrania? Chybové hlásenie?)?

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Aký prehliadač používaš?

• Ktorá časť pravidiel nebola dodržaná v BGA adaptácii?

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Je možné vidieť porušenie pravidiel na zázname z hry? Ak áno, aké je číslo ťahu?

• Aký prehliadač používaš?

• Aký herný ťah si chcel urobiť?

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Čo si skúsil aby si vyvolal túto akciu?

• Čo sa stalo keď si spravil túto hernú akciu (chybové hlásenie, hlásenie v stavovom pruhu, ...)?

• Aký prehliadač používaš?

• Kedy v priebehu hry sa problém vyskytol (aká bola prebiehajúca herná inštrukcia)?

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Čo sa stalo keď si spravil túto hernú akciu (chybové hlásenie, hlásenie v stavovom pruhu, ...)?

• Aký prehliadač používaš?

• Prosím popíš viditeľný problém. Ak máš screenshot (dobrý zvyk), môžeš použiť Imgur.com na jeho nahranie a skopírovať sem odkaz na neho.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Aký prehliadač používaš?

• Skopíruj/vlož text zobrazený v angličtine namiesto tvojho jazyka. Ak máš screenshot (dobrý zvyk), môžeš použiť Imgur.com na jeho nahranie a skopírovať sem odkaz na neho.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Je tento text dostupný v prekladovom systéme? Ak áno, bol preložený po dlhšie ako 24 hodín?

• Aký prehliadač používaš?

• Prosím presne a stručne vysvetli svoj podnet, aby bolo čo najjednoduchšie pochopiť, ako to myslíš.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Aký prehliadač používaš?